Noctua NH-U12P Manual do Utilizador descarregar pdf

Thank you very much for choosing a Noctua

cooler. This manual will guide you through the

installation process step by step.

Noctua LGA775 Mounting-Kit

Installation Manual

NH-U12P-LGA775

Installation Manual

Required mounting parts (from the LGA775-bag):

the backplate’s screw sockets with the mainboard’s screw-

holes.

Step 3:

Attaching the fastening brackets to the heatsink

Now screw the mounting bars to the backplate using 4 short

screws.

Tightly screw the fastening brackets to the base of the heatsink

using 4 short screws.

Step 4:

Applying thermal paste

If there are residual traces of thermal paste or thermal pads on

your CPU, please clean them off first.

Removing the mainboard

Step 1:

In case you want to use the NH-U12P on an assembled system,

you first have to remove the mainboard from the case as the

cooler has to be screwed together with the backplate on the

back side of the mainboard.

Prior to installing the cooler, please consult the compat-

ibility list on our website and verify that the cooler is fully

compatible with your motherboard.

Should you encounter any difficulties, please check the

FAQs on our website and don’t hesitate to contact our

support team at [email protected]. Noctua cannot

be held responsible for any damage or losses caused by

compatibility issues.

Multilingual versions of this manual are available on our

website: www.noctua.at

2x springscrews with

internal thread

2x LGA mounting bars

Required mounting parts (from the common parts bag):

2x LGA fastening brackets 4x self-adhesive washers

2x pressure springs8x short screws

Press a small drop (4-5mm diameter) of NT-H1 onto the cen-

tre of the heat-spreader.

Put the heatsink onto the CPU and turn it back and forth a few

times in order to spread the paste.

Caution: Take off the protection cover at the bottom side of

the heatsink first!

Caution: Applying too much thermal paste will lower the heat

conductivity and cooling performance!

Caution: The insulation of the LGA backplate has to face the

mainboard

Step 2:

Attaching the backplate

Place the backplate on the back side of the mainboard, aligning

Orientation A Orientation B

Choose the alignment of the mounting bars according to the

desired final orientation of the cooler:

Caution: Make sure that the straight sides of the mounting

bars face the socket and the bulgings are pointing outwards.

Caution: Don’t forget to stick 4 self-adhesive washers to the

mounting brackets.

1x LGA backplate

Rev. 1.1

1 2 3 4

Resumo do Conteúdo

Página 1 - Rev. 1.1

Thank you very much for choosing a Noctua cooler. This manual will guide you through the installation process step by step.Noctua LGA775 Mounting-Kit

Página 2

NH-U12P-LGA775 | Installation ManualAttaching the fanStep 6:First stick the 2 anti-vibration strips onto the cooling fins in order to dampen minor vib

Página 3 - NH-U12P-AM2(+)

Thank you very much for choosing a Noctua cooler. This manual will guide you through the installation process step by step.Noctua AM2(+) Mounting-Kit

Página 4

NH-U12P-AM2(+) | Installation ManualAttaching the fanStep 6:First stick the 2 anti-vibration strips onto the cooling fins in order to dampen minor vi

Mais documentos para Acessórios para Computador Noctua NH-U12P

Para ver o documento Noctua NH-U12P Manual do Utilizador

Noctua NH-U12P Manual do Utilizador (4 páginas)

Comentários a estes Manuais

Sem comentários

Noctua NH-U12P Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Acessórios para Computador Noctua NH-U12P. Noctua NH-U12P User Manual Manual do Utilizador

Resumo do Conteúdo

Mais documentos para Acessórios para Computador Noctua NH-U12P

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios para Computador Noctua NH-U12P